Watt Wise support

Help, without a maze.

Most questions about Watt Wise come down to how the estimate is worked out. Start with the answers below. If something still looks wrong, email a real person.

Email info@tinylittleapps.com

Quick answers

Most questions start here.

01

Getting started

Watt Wise opens with an editable example: a 1,000 Wh battery at 80% charge with a 10% reserve, running one 100 W DC load, which works out to 7 h 00 min. Drag the charge bar or change the load to see the estimate respond, then tap Set Up My Battery to start your own setup. Tap the battery summary to enter your capacity, and use Add device to list what you'll run.

02

How is the runtime calculated?

Usable energy is your capacity × (charge − reserve). Each device on the list adds watts × quantity × duty cycle. AC devices are divided by your inverter's efficiency, and the inverter's idle draw is added once if any AC device is running. Runtime is usable energy divided by that total battery-side demand.

03

Why doesn't it match my real runtime?

Watt Wise gives an estimate, not a measurement. Real runtime changes with temperature, battery age, discharge rate, equipment losses, and how devices actually draw power, such as a fridge compressor cycling or a startup surge. For a more conservative plan, raise the reserve, use the wattage on your device's label, or lower the inverter efficiency.

04

What's duty cycle?

The share of time a device draws its stated power. A 200 W appliance at 25% duty cycle averages 50 W. Use 100% for anything that runs constantly, and a lower value for things like a 12 V cooler that switches on and off.

05

AC or DC?

Choose AC for anything plugged into your power station's AC outlets, which go through its inverter. Choose DC for USB, 12 V, or other direct outputs. Set the inverter's efficiency and idle draw by tapping the battery summary. Efficiency only affects AC devices.

06

It says "No usable charge" or "Add an active load"

Instead of showing a misleading number, Watt Wise explains why it can't make an estimate. "No usable charge" means the charge is at or below your reserve. "Add an active load" means there's nothing to power: no devices, all of them switched off, or each at 0% duty cycle. If a field is invalid, the fix is shown next to it.

07

Does it read my battery's charge?

No. Watt Wise never connects to your battery, power station, or any other equipment, and it doesn't use your iPhone's battery level. The charge you set is a scenario value. It stays exactly where you left it and never drains or recharges on its own.

08

My battery is rated in amp-hours

In Settings, set Capacity entry to amp-hours × volts. Watt Wise converts Ah × V to watt-hours, so a 100 Ah battery at 12.8 V is 1,280 Wh. Switching between modes never changes the stored capacity.

09

Saving and managing setups

Changes save automatically. Use the setups button at the top left to create, open, rename, duplicate, or delete setups. Watt Wise reopens the one you used last. If you want the example back, choose Restore Example Setup in Settings; your own setups are kept.

10

My data and privacy

Everything you enter stays on your iPhone. Watt Wise has no account and makes no internet connection. Deleting the app removes its data. See the privacy policy for details.

Contact support

Tell us what you saw.

Include your iPhone model, iOS version, and the steps that led to the issue. If an estimate looks wrong, list the capacity, charge, reserve, inverter settings, and devices you entered so we can check the math with you.

info@tinylittleapps.com